2 cm silver-plated hoop earrings with Luck pendants with pearls

How to choose a ring size?

The easiest way to choose a ring size is to follow its diameter.

The diameter is the section measured inside the ring, at its widest point.

Prepare:

• your ring of matching size
• ruler
• a piece of paper

Method 1:

1. Wrap a strip of paper around the finger where you want to place the ring.
2. Make sure the paper is pulled tightly on your finger, the tighter the better, to find the best fit.
3. Mark where the paper meets and measure the distance with a ruler (mm).
4. Use the chart below to determine your ring size.

Method 2:

1. Apply the ring to the ruler.
2. Measure the two outermost points inside the ring.
3. Round up to a full millimeter.
4. Use the chart below to determine your ring size.

Standard ring size chart

Size chart for adjustable rings

Tips

When measuring, round the result to the nearest whole millimeter.

Adjust the size to the thickest finger on which you will wear the ring.

Measure your fingers at the end of the day, when they are at their largest.

The cold can shrink your fingers by up to half, so make sure they are warm.

Do you have any questions?

Our Customer Service is at your service. Write to us here.

How to choose the size of the bracelet?

To make the bracelet fit perfectly, measure the circumference of your wrist and check the size chart of the selected model.

Measure the circumference of your wrist according to the instructions below.

Prepare:

• centimeter
• string
• marker

We also offer cuff and bangle bracelets, which are sized by diameter.

Method 1:

Method2:

Wrap a string around the wrist just above the bone. Using a marker, mark the spot where the ends of the string meet. Then lay the string on a flat surface and measure its length to the marked spot. Write down the circumference.

Circumference table for cuff bracelets and bangles

Tips

For string bracelets, we recommend choosing a size that corresponds to the size of your wrist. String bracelets have an adjustment of about 2-3 cm, allowing them to fit your wrist exactly.

If you prefer looser chain bracelets, choose a size larger.

Remember that bangle bracelets are worn by the hand, take this into account when choosing the right size.

Do you have any questions?

Our Customer Service is at your service. Write to us here.

Chain size selection

It is not obvious and is often questionable. We have prepared a graphic for you to visually illustrate the lengths of our chains.

Chain for children - what length?

For the youngest we recommend the shortest available length, which is 40 cm.

What length of chain to choose for an adult?

It all depends, of course, on the effect you want to achieve. However, there are a few tips to help you decide. Here they are: First of all, choose a pendant. Its size will certainly affect the question of chain length. Think about what occasions you will wear the necklace. Will it be an everyday accessory? Or are you looking for a piece of jewelry for a specific occasion, to go with your chosen outfit? It is worth measuring the circumference of your neck. For circumferences over 40 cm, we suggest lengths over 50 cm. If you do not want to fasten the chain just put it over your head, we suggest a length of 70 cm.

Do you have any questions?

Our Customer Service is at your service. Write to us here.

How to choose a ring size?

The easiest way to choose a ring size is to follow its diameter.

The diameter is the section measured inside the ring, at its widest point.

Prepare:

• your ring of matching size
• ruler
• a piece of paper

Method 1:

1. Wrap a strip of paper around the finger where you want to place the ring.
2. Make sure the paper is pulled tightly on your finger, the tighter the better, to find the best fit.
3. Mark where the paper meets and measure the distance with a ruler (mm).
4. Use the chart below to determine your ring size.

Method 2:

1. Apply the ring to the ruler.
2. Measure the two outermost points inside the ring.
3. Round up to a full millimeter.
4. Use the chart below to determine your ring size.

Standard ring size chart

Size chart for adjustable rings

Tips

When measuring, round the result to the nearest whole millimeter.

Adjust the size to the thickest finger on which you will wear the ring.

Measure your fingers at the end of the day, when they are at their largest.

The cold can shrink your fingers by up to half, so make sure they are warm.

Do you have any questions?

Our Customer Service is at your service. Write to us here.

How to choose the size of the bracelet?

To make the bracelet fit perfectly, measure the circumference of your wrist and check the size chart of the selected model.

Measure the circumference of your wrist according to the instructions below.

Prepare:

• centimeter
• string
• marker

We also offer cuff and bangle bracelets, which are sized by diameter.

Method 1:

Method2:

Wrap a string around the wrist just above the bone. Using a marker, mark the spot where the ends of the string meet. Then lay the string on a flat surface and measure its length to the marked spot. Write down the circumference.

Circumference table for cuff bracelets and bangles

Tips

For string bracelets, we recommend choosing a size that corresponds to the size of your wrist. String bracelets have an adjustment of about 2-3 cm, allowing them to fit your wrist exactly.

If you prefer looser chain bracelets, choose a size larger.

Remember that bangle bracelets are worn by the hand, take this into account when choosing the right size.

Do you have any questions?

Our Customer Service is at your service. Write to us here.

Chain size selection

It is not obvious and is often questionable. We have prepared a graphic for you to visually illustrate the lengths of our chains.

Chain for children - what length?

For the youngest we recommend the shortest available length, which is 40 cm.

What length of chain to choose for an adult?

It all depends, of course, on the effect you want to achieve. However, there are a few tips to help you decide. Here they are: First of all, choose a pendant. Its size will certainly affect the question of chain length. Think about what occasions you will wear the necklace. Will it be an everyday accessory? Or are you looking for a piece of jewelry for a specific occasion, to go with your chosen outfit? It is worth measuring the circumference of your neck. For circumferences over 40 cm, we suggest lengths over 50 cm. If you do not want to fasten the chain just put it over your head, we suggest a length of 70 cm.

Do you have any questions?

Our Customer Service is at your service. Write to us here.

How to choose a ring size?

The easiest way to choose a ring size is to follow its diameter.

The diameter is the section measured inside the ring, at its widest point.

Prepare:

• your ring of matching size
• ruler
• a piece of paper

Method 1:

1. Wrap a strip of paper around the finger where you want to place the ring.
2. Make sure the paper is pulled tightly on your finger, the tighter the better, to find the best fit.
3. Mark where the paper meets and measure the distance with a ruler (mm).
4. Use the chart below to determine your ring size.

Method 2:

1. Apply the ring to the ruler.
2. Measure the two outermost points inside the ring.
3. Round up to a full millimeter.
4. Use the chart below to determine your ring size.

Standard ring size chart

Size chart for adjustable rings

Tips

When measuring, round the result to the nearest whole millimeter.

Adjust the size to the thickest finger on which you will wear the ring.

Measure your fingers at the end of the day, when they are at their largest.

The cold can shrink your fingers by up to half, so make sure they are warm.

Do you have any questions?

Our Customer Service is at your service. Write to us here.

How to choose the size of the bracelet?

To make the bracelet fit perfectly, measure the circumference of your wrist and check the size chart of the selected model.

Measure the circumference of your wrist according to the instructions below.

Prepare:

• centimeter
• string
• marker

We also offer cuff and bangle bracelets, which are sized by diameter.

Method 1:

Method2:

Wrap a string around the wrist just above the bone. Using a marker, mark the spot where the ends of the string meet. Then lay the string on a flat surface and measure its length to the marked spot. Write down the circumference.

Circumference table for cuff bracelets and bangles

Tips

For string bracelets, we recommend choosing a size that corresponds to the size of your wrist. String bracelets have an adjustment of about 2-3 cm, allowing them to fit your wrist exactly.

If you prefer looser chain bracelets, choose a size larger.

Remember that bangle bracelets are worn by the hand, take this into account when choosing the right size.

Do you have any questions?

Our Customer Service is at your service. Write to us here.

Chain size selection

It is not obvious and is often questionable. We have prepared a graphic for you to visually illustrate the lengths of our chains.

Chain for children - what length?

For the youngest we recommend the shortest available length, which is 40 cm.

What length of chain to choose for an adult?

It all depends, of course, on the effect you want to achieve. However, there are a few tips to help you decide. Here they are: First of all, choose a pendant. Its size will certainly affect the question of chain length. Think about what occasions you will wear the necklace. Will it be an everyday accessory? Or are you looking for a piece of jewelry for a specific occasion, to go with your chosen outfit? It is worth measuring the circumference of your neck. For circumferences over 40 cm, we suggest lengths over 50 cm. If you do not want to fasten the chain just put it over your head, we suggest a length of 70 cm.

Do you have any questions?

Our Customer Service is at your service. Write to us here.